Table of Contents
Advertisement
Useful features
Booster
When set to "auto", picture noise is reduced for TV broadcast signal strength from
moderate regions.
Automatically sets to "off" for a strong electrolytic signal that has a constant level.
1
Press MENU to display the TV menu.
2
Press a/b to select "Features", and then
press ENTER.
3
Press a/b to select "Booster", and then
press ENTER.
4
Press c/d to select "auto" or "off", and then
press ENTER.
5
Press MENU to exit.
te:
NOTE
• In regions with pronounced changes in TV signal strength or very strong signal strength,
the effect is negligible and may produce instability. In such case, turn the setting "off".
The built-in TV booster cannot handle regions with extremely weak signal strength. After
consulting with the store of purchase, please attach an external booster antenna.
Sleep timer
Allows you to set a time when the TV automatically switches to standby.
1
Press SLEEP.
• Remaining time displays when sleep timer has
been set.
S l e e p T i m e r 3 0
2
Each time you press SLEEP, the remaining
time switches as shown below.
• When the time has been set, countdown
automatically starts.
• Five minutes before the preset of time expires,
the remaining time displays each minute.
off
30
te:
NOTE
• Select "off" by pressing SLEEP to cancel the sleep timer.
• When the sleep timer is working, its indicator on the Display lights red.
60
90
120
(minutes)
TV menu
Picture
Audio
Preset
Features
AV connections
First installation
Language
Back
End
R
M
Features
Brightness
[bright]
Quick shoot
[ off]
V.Position
[
0]
AV-IN3/OUT
[ IN3]
Booster
[auto]
Auto power off
[ off]
Speaker
[Detachable]
On-screen display
Back
End
R
M
15
Advertisement
Table of Contents
