Download Print this page

Troubleshooting - Breville Chill Control BWC200 Instruction Booklet

The chill control

Advertisement

TROUBLESHOOTING

16
TROUBLESHOOTING
PAGE HEAdER.....
PROBLEM
POSSIBLE CAUSES
Filtered water not cold
Water chiller positioned
in direct sunlight
enough
High ambient
conditions (30˚C +)
Water Chiller too close
to wall
Water Chiller has not
been switched ON long
enough.
After filling-up 1 litre
Chilling tank capacity
is approximately 1 litre.
water bottle, water is not
It takes approximately
cold anymore
75 minutes to chill
1 litre water from
room temperature.
Fan too noisy/does not
High ambient
switch off
conditions (30˚C +)
Unit is running in
high power mode
How do I know the water
has chilled?
LEd not switching from
Initial water
WHITE to BLUE
temperature in chill
tank is too high
High ambient
conditions (30˚C +)
Water Chiller too close
to wall
Water Chiller has not
been switched ON
long enough
WHAT TO dO
Move water chiller away
from direct sunlight.
In warmer conditions,
the time to chill will
take longer.
Position water chiller
min 10cm clearance away
from walls.
Wait approximately
75 minutes after filling
with tap water.
Wait approximately
75 minutes after
dispensing large
amount of chilled water.
In warmer conditions,
the time to chill will
take longer.
The LED light will switch
from WHITE to BLUE.
Move water chiller away
from direct sunlight.
In warmer conditions,
the time to chill will
take longer.
Position water chiller
min 10cm clearance away
from walls.
Wait approximately
75 minutes after filling
with tap water.
17

Advertisement

loading