Advertisement
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSES
LEd indicator flashing
•
Water Chiller is in Auto
Protection Mode
& alternating between
WHITE & BLUE
Water does not flow
•
Air lock in internal
tubing
during initial flushing
Flow rate of water slow
•
Not enough water in
water tank
Water tank has small
•
Brita filter cartridge
& unit have not been
dark particles
flushed
How can I clean the
chilling chamber
There is a flashing arrow
•
The Brita Filter
cartridge may need
& no bars appearing on
to be replaced
the Brita Memo indicator
What does the Brita Filter
cartridge remove from
the water?
Where can I purchase the
Brita Filter cartridges
18
WHAT TO dO
Fan externally obstructed
or an error with the internal
electronics.
Unplug the unit & wait a
few minutes to reset the
unit.
If problem persists call
Breville Customer Service
1300 139 798
With the chilling chamber
full, move slider to the
middle position and
use the plug like a sink
plunger while holding the
dispensing paddle open to
clear the air lock.
Ensure the water level is
always above the MIN level
for optimum flow rate.
Immerse the filter cartridge
in cold water and agitate to
remove air bubbles.
Flush the unit twice before
each new cartridge.
Remove the plastic plug in
the filter tank to clean the
chilling chamber.
Brita Filter Cartridge
should be replaced every
8 weeks.
The Brita Filter reduces
chlorine, metals such as
lead, copper, & limescale.
Leaves in flouride.
Brita filter cartidges are
available at all leading
retailers or contact Brita
Consumer Service
Ph: 1300 557 762
NOTES
19
Advertisement
