Advertisement
CARE & CLEANING
for your Breville Chill Control™
CARE & CLEANING FOR yOUR BREvILLE CHILL CONTROL™
CARE & CLEANING
1.
Switch the appliance Off and unplug
the power cord from the power outlet
before cleaning.
2.
Remove the lid, pre-filter tank and
water from the filter tank.
3.
To empty the stainless steel cooling
reservoir, remove the plastic plug that
separates the filtered water from the
cooling reservoir.
4.
Turn the appliance upside down to
drain any remaining water from the
cooling reservoir.
5.
Wipe the inside of the filter tank
and cooling reservoir with a clean,
damp cloth.
6.
Wash the lid, pre-filter tank and plastic
plug in warm soapy water using a mild
detergent and dry thoroughly.
7.
Wipe exterior of appliance with a soft,
damp cloth.
8.
Do not immerse the base in water or
any other liquid
REMOvABLE PLASTIC PLUG
The Breville Chill Control™ includes a
removable plastic plug that separates
filtered from chilled water. As well as
making the cleaning of the cooling
reservoir easy, it assists in the cooling
process to keep the water cool.
The plastic plug can be dismantled for
cleaning. Simply squeeze the sides to
release as shown below and wash with
warm soapy water.
STORAGE
Ensure the Breville Chill Control™ is
switched Off, all internal tanks are
emptied of water and it is clean and dry
before storing.
Stand the Breville Chill Control™ upright
on the power base. Do not store anything
on top.
Flush the appliance again before using
again (see instructions on page 9)
NOTE
Do not use alkaline or abrasive
cleaning agents, steel wool or
scouring pads as these can damage
the surface of the appliance.
Do not place any part of this appliance
in a dishwasher.
15
Advertisement
