Table of Contents
Advertisement
Thank you for purchasing WRT-410. This device features the latest innovation wireless technology
making the wireless networking world happened. This manual guides you on how to install and properly
use the WRT-410 in order to take full advantage of its features.
1.1 Package Contents
Make sure that you have the following items:
One WRT-410
One dipole antenna
One AC Power Adapter
One User's Manual CD
One Quick Installation Guide
Note:
If any of the above items are missing, contact your supplier as soon as
possible.
1.2 System Requirements
Before installation, please check the following requirements with your equipment.
Pentium Based (And Above) IBM-Compatible PC System
CD-ROM drive
Windows 98/ME/NT/2000/XP Operating System with TCP/IP protocol
1.3 Features
2.4GHz ISM band, unlicensed operation
Strong network security with 802.1X authentication, and 64/128-bit WEP encryption
Supports WPA (Wi-Fi Protected Access) for both 802.1x and WPA-PSK
Dual-standard capability: 802.11g and 802.11b compliant
Super G mode efficiently raises the data transfer rate up to 108Mbps
Supports DHCP server
Web Configuration provide a user friendly interface for the user to configure through web
browser
Support MAC Filter
Build-in 4 -port switch
Provides Setup Wizard for the user to configure easily in the first time
Chapter 1 Introduction
- 1 -
Advertisement
Table of Contents
