Log - Planet Networking & Communication 802.11g Wireless Broadband Router WRT-410 User Manual

Firmware Version: Displays the latest build of the WRT-410 firmware interface. After upgrading the
firmware in Tools -> Firmware, check this to ensure that your firmware was successfully upgraded.
LAN: This field displays the WRT-410 LAN interface MAC address, IP address, subnet mask, and DHCP
server status. Click "DHCP Table" to view a list of client stations currently connected to the WRT-410
LAN interface.
Wireless: Displays the WRT-410 wireless connection information, including the WRT-410 wireless
interface MAC address, connection status, SSID status, which channel is being used and whether WEP
is enabled or not.
WAN: This field displays the WRT-410 WAN interface MAC address, DHCP client status, IP address,
subnet mask, default gateway and DNS. Click "DHCP Release" to release IP addresses get from ISP for
the WAN port. Click "DHCP Renew" to get a new IP addresses from ISP for the WAN port.

3.3.2 Log

This screen will show you a running log of system statistics, events and activities. The log displays up to
200 entries. Older entries are overwritten by new entries. You can save logs via the Log Settings option
-> "Send to". The Log screen commands and information meaning are as follows
- 14 -