Table of Contents
Advertisement
Network Address: Type the static IP address your network uses to access the Internet. Your ISP or
network administrator provides you with this information.
Network Mask: Type the network (subnet) mask for your network. If you do not type a value here, the
network mask defaults to 255.255.255.255. Your ISP or network administrator provides you with this
information.
Gateway Address: Type the gateway address of your network. Your ISP or network administrator
provides you with this information.
Interface: Select the interface WAN or LAN that you will use to connect to the Internet.
Metric: Select which metric you want to apply to this configuration.
Add: Click to add a configuration to the static IP address table at the bottom of this page.
Update: Select one of the entries in the static IP address table at the bottom of the page and, after
changing parameters, click "Update" to confirm the changes.
Delete: Select one of the entries in the static IP address table at the bottom of the page and click "Delete"
to remove the entry.
New: Click "New" to clear the fields and add required information to create a new entry.
3.4.2 Dynamic
This screen allows you to set the NAT parameters.
- 18 -
Advertisement
Table of Contents
