Table of Contents
Advertisement
Public Port: Type the port number on the WAN that will be used to provide access to the virtual server.
LAN Server: Type the LAN IP address that will be assigned to the virtual server.
Add: Click to add the virtual server to the table at the bottom of the screen.
Update: Click to update information for the virtual server if you have selected a list item and have made
changes.
Delete: Select a list item and click "Delete" to remove the item from the list.
Clear: Click "Clear" to erase all fields and enter new information.
3.5.3 Special AP
This screen allows you to specify special applications, such as games, that require multiple connections
that are inhibited by NAT.
The special applications profiles are listed in the table at the bottom of the page.
Enable: Click to enable or disable the application profile. When enabled, users will be able to connect to
the application via the WRT-410 WAN connection. Click Disabled on a profile to prevent users from
accessing the application on the WAN.
Name: Type a descriptive name for the application.
Trigger: Defines the outgoing communication that determines whether the user has legitimate access to
the application.
Protocol: Select the protocol (TCP, UDP or ICMP) that can be used to access the application.
Port Range: Type the port range that can be used to access the application in the fields.
Incoming: Defines which incoming communications users are permitted to connect with.
Protocol: Select the protocol (TCP, UDP or ICMP) that can be used by the incoming communication.
Port: Type the port number that can be used for the incoming communication.
Add: Click to add the special application profile to the table at the bottom of the screen.
Update: Click to update information for the special application if you have selected a list item and have
made changes.
Delete: Select a list item and click "Delete" to remove the item from the list.
Clear: Click "Clear" to erase all fields and enter new information.
- 24 -
Advertisement
Table of Contents
