Planet Networking & Communication 802.11g Wireless Broadband Router WRT-410 User Manual page 41

Certificate
17. The Automatic Certificate Request Setup Wizard will guide you through the Automatic
Request setup, simply click "Next" through to the last step.
18. Click "Finish" to complete the Automatic Certificate Request Setup
19. Go to Start > Run, and type "command" and click "Enter" to open Command Prompt.
20. Type "secedit/refreshpolicy machine_policy" to refresh policy.
Adding Internet Authentication Service
21. Go to Start > Control Panel > Add or Remove Programs.
22. Select "Add/Remove Windows Components" from the panel on the left.
23. Select "Internet Authentication Service", and click "OK" to install.
- 36 -