Table of Contents
Advertisement
CAUTION REGARDING THE EXHAUST OF THE PROJECTOR
Do not place the projector in a space that is poorly ventilated or confined. Allow at least 20 in. (50 cm) clearance from walls
and have free air flow around the projector.
Before using the projector, please read this operation guide carefully.
To facilitate reporting the loss or theft of your Wolf Cinema components, record the Serial Number located (a) on the bottom of the
projector and (b) on the rear of the outboard ProScaler; retain this information. Before recycling the packaging, be sure that you
have checked the contents of the carton(s) thoroughly against the list of "Package Contents" on page 6.
WARRANTY
Promptly register the Projector's Warranty using the REGISTRATION CARD packed with the projector. The Warranty assures that
you immediately receive the full benefit of the parts, service and labor warranty applicable to your purchase.
LED LIGHT:
DO NOT STARE INTO BEAM
CLASS 2 LED PRODUCT
P
ICE 60825-1:1993 + A1:1997 + A2:2001
EN 60825-1:1994 + A2:2001 + A1:2002
y
0.88 mW
= 452 nm
DCL-200 FD
Exhaust Vent
Air Intake Vent
3
Advertisement
Table of Contents
