Selecting The On-Screen Display Language; Adjusting The Projector Menus - Wolf DCL-200 FD User Manual

Selecting the On-screen Display Language

The on-screen display language of the projector can
be set to English, Français, Italiano, Deutsch, Español,
Chinese, Japanese, Korean.
1 Press TV/Projector then MENU.
The projector menu will be displayed.
2 Scroll down and select Language
3 Press the right arrow, select the desired
language, then press OK.
4 Press EXIT.

Adjusting the Projector Menus

This projector has a set of menu screens that allow
you to adjust the image and select various projector
settings. You can operate the menus from the remote
control using the following procedure.
1 Press TV/Projector then MENU on the remote
control. The projector menu will be displayed.
2 Press OK and then the right or down arrows to
select the menu you want to adjust.
3 Press OK or the right arrow to reach the
adjustment menu. Scroll to select the item
you wish to adjust.
4 Press OK to adjust the item, then use the left
or right arrow button to adjust the desired
parameters.
5 Press EXIT to exit the adjustment menu.
Note: When no input source is detected, the Picture, Fine Sync and Layout are not active. When selecting the projector
menus, always point the universal remote control at the projector, and select
projector functions.
DCL-200 FD
TV/Projector
Button
Menu Button
OK Button
TV/Projector
Exit Button
first to enable the discrete
21