Film Mode; Sti - Wolf DCL-200 FD User Manual

Film Mode

This function allows you to select the type of incoming
video content-film. Different processing algorithms
are applied for each type of video content.
Wolf Cinema recommends you leave the system in
the AUTO mode.
Reproduces the image of
the film source clearly.
Displays the optimized
image of film transformed
with 3:2 pull down
Film Mode
(NTSC and PAL60Hz)
or 2:2 pull down
(PAL 50Hz and SECAM)
enhancement to
progressive mode images.
Note: In PAL50Hz or SECAM, the 2:2 pull down enhancement will be enabled only in film mode, after the film source has
been entered.

STI

This function allows you to set the LTI and CTI levels.
Selected Item
LTI Adjusts the LTI level to
Luminance enhance luminance,
Transient filter fuzzy edges
Improvement and remove smear.
CTI Adjusts the CTI level to
Color
Transient filter fuzzy edges
Improvement and remove smear.
Description
enhance color,
DCL-200 FD
35