Deleting An Array - IBM SSA 32H3816 Installation And User Manual

5.6 Deleting an Array

Before deleting an array, delete any operating-system-partition definitions that affect the array.
There are two steps to be performed if you want to delete the definition of an array from the system:
1. From the Main Menu, select System Resources. A window opens showing the list of all resources currently defined to the
system:
+----------------------------------------------------------------------------------+
¦
¦
¦ +-----------------------------------------------------------------------+
¦ ¦CONFIG SSA Configurator and Service Aids
¦ +-----------------------------------------------------------------------+
¦ +----------------------------+
¦ ¦
¦ +----------------------------¦
¦ ¦
¦ ¦ New Disks
¦ ¦ Free Resour+------------------------------------------------¦
¦ ¦ System Reso¦SSA UID/Array Name
¦ ¦ SSA Adapter¦1. xxxxxxxxx
¦ ¦ Event/Error¦2. UID4xxxxx
¦ ¦ Service Aid¦3. FUDI00xxx
¦ ¦ About
¦ ¦
¦ ¦
¦ ¦
¦ ¦
¦ +----------------------------+
¦ +----------------------------------------------------------------+
¦ ¦<ESCAPE> Exit
¦ ¦<F1> Help <F9> FlashOn
¦ +----------------------------------------------------------------+
¦
¦
+----------------------------------------------------------------------------------+
Highlight the entry for the array that you want to delete, make a note of its adapter number and array name, press Delete, and
confirm the deletion at the prompt.
2. From the SSA Main Menu, select SSA Adapter List. The SSA Adapter List window opens:
+----------------------------------------------------------------------------------+
¦
¦
¦ +-----------------------------------------------------------------------+
¦ ¦CONFIG SSA Configurator and Service Aids
¦ +-----------------------------------------------------------------------+
¦ +----------------------------+
¦ ¦
¦ +----------------------------¦
¦ ¦
¦ ¦ New Disks
¦ ¦ Free Resources
¦ ¦ Syst+-----------------------------------------+
¦ ¦ SSA ¦
¦ ¦ Even+-----------------------------------------¦
¦ ¦ Serv¦ Bus X
¦ ¦ Abou¦ Bus X
¦ ¦ ¦
¦ ¦ +-----------------------------------------+
¦ ¦
¦ ¦
¦ +----------------------------+
¦ +----------------------------------------------------------------+
¦ ¦<ESCAPE> Exit
¦
¦
+----------------------------------------------------------------------------------+
Select the adapter that controls the array that you want to delete (you noted the details of this adapter in step 1). The
adapter-menu window opens:
SSA RAID Adapter Installation and User's Guide.
Deleting an Array
Main Menu ¦
+------------------------------------------------+
¦ List of System Resources
¦
¦
¦
+------------------------------------------------+
¦
<ENTER> Select <INSERT> Insert
<F10> FlashOff
Main Menu ¦
¦
¦
¦
SSA Adapter List
Device Y Slot Z
Device N Slot T
¦
¦
<ENTER> Select <F1> Help
_ Copyright IBM Corp. 1996
5.6 - 1
Vyymmdd XX Version¦
Status Adapter Disk ¦
Online 15
Online 15
Online 16
<DELETE> Delete ¦
Vyymmdd XX Version¦
¦
Adapter (Q) ¦
Adapter (S) ¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦ ¦
¦
¦
14h ¦ ¦
16h ¦ ¦
17h ¦ ¦
¦ ¦
¦ ¦
¦ ¦
¦
¦
¦
¦
¦
¦ ¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦ ¦
¦
¦