Table of Contents
Advertisement
Preparation
Setting date and time
When the unit is turned on for the first time, a message asking you to set the date and time
will appear.
Select [YES] and perform steps 2 to 3 below to set the date and time.
1
Select the menu. (l 24)
MENU
: [OTHER FUNCTION] # [CLOCK SET] # [YES]
2
Touch the date or time to be set, then set
the desired value using
≥ The year can be set between 2000 and 2039.
≥ The 24-hour system is used to display the time.
3
Touch [ENTER].
≥ The screen may switch to the setting screen for the [TIME ZONE]. Touch the screen and
set the [TIME ZONE].
≥ Touch [EXIT] to complete the setting.
≥ The date and time function is driven by a built-in lithium battery.
≥ If the time display becomes [- -], the built-in lithium battery needs to be charged. To
recharge the built-in lithium battery, connect the AC adaptor or attach a charged battery to
this unit. Leave the unit as it is for approx. 24 hours and the battery will maintain the date
and time for approx. 6 months. (The battery is still being recharged even if the unit is off.)
≥ Display method of clock can be changed by setting the [DATE/TIME] or [DATE FORMAT].
For the United Kingdom and Ireland customers
WARNING
THE LITHIUM BATTERY IN THIS EQUIPMENT MUST ONLY BE REPLACED BY
QUALIFIED PERSONNEL. WHEN NECESSARY, CONTACT YOUR LOCAL PANASONIC
SUPPLIER.
/
.
23
(ENG) VQT3V01
Advertisement
Table of Contents
