TABLE OF CONTENTS PAGE PAGE 1 Safety Precautions -----------------------------------------------3 1.1. General Guidelines ----------------------------------------3 1.2. Leakage Current Cold Check ---------------------------3 1.3. Leakage Current Hot Check (See Figure 1.)--------3 1.4. How to Discharge the Capacitor on Flash P.C.B.----------------------------------------------------------4 2 Warning --------------------------------------------------------------5 2.1. Prevention of Electrostatic Discharge (ESD) to Electrostatically Sensitive (ES) Devices ----------5 2.2.
1 Safety Precautions 1.1. General Guidelines 1.3. Leakage Current Hot Check 1. IMPORTANT SAFETY NOTICE (See Figure 1.) There are special components used in this equipment 1. Plug the AC cord directly into the AC outlet. Do not use which are important for safety. These parts are marked by an isolation transformer for this check.
1.4. How to Discharge the Capacitor on Flash P.C.B. • This unit equipped with two pieces of capacitors as flash charging capacitors. “Either one of the capacitor discharging operation” makes discharging for others as well. CAUTION: 1. Be sure to discharge the capacitor on FLASH P.C.B.. 2.
2 Warning 2.1. Prevention of Electrostatic Discharge (ESD) to Electrostatically Sensitive (ES) Devices Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Elec- trostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field-effect transistors and semiconductor "chip"...
2.3.2.3. How to Replace the Fuse A replacement fuse cover can be purchased from your local Panasonic Dealer. 1. Remove the Fuse Cover with a screwdriver. If the fitted moulded plug is unsuitable for the socket outlet in your home then the fuse should be removed and the plug cut off and disposed of safety.
NOTE: This Lithium battery is a critical component. (Type No.: ML-614S/ZTK Manufactured by Energy Company, Panasonic Corporation) It must never be subjected to excessive heat or discharge. It must therefore only be fitted in requirement designed specifically for its use.
When a part replacement is required for repairing MAIN P.C.B., replace as an assembled parts. (Main P.C.B.) 2. The following category is /are recycle module part. Please send it/them to Central Repair Center. • MAIN P.C.B. (VEP03H94BN: HDC-SDX1P) • MAIN P.C.B. (VEP03H94BP: HDC-SDX1EC/EG)
3.4. How to Define the Model Suffix (NTSC or PAL model) There are three kinds of HDC-SDX1. • a) HDC-SDX1P • b) HDC-SDX1EC/EG • c) HDC-SDX1GC What is the difference is that the “INITIAL SETTING” data which is stored in Flash ROM mounted on Main P.C.B..
5 Location of Controls and Components Power button [ 1 2 3 4 Delete/Video light button /LIGHT] Intelligent auto/Manual button [iA/MANUAL] Optical image stabilizer button O.I.S.] Recording start/stop button Battery holder HDMI mini connector [HDMI] USB terminal [ AV MULTI AV multi connector [AV MULTI] Use the AV multi cable (only the supplied cable).
Page 13
24 Tripod receptacle 25 Battery release lever [BATT] 26 Photoshot button [ 27 Zoom lever [W/T] (In Motion Picture Recording Mode or Still Picture Recording Mode) Thumbnail display switch [ Volume lever [ VOL ] (In Playback Mode) 28 Mode switch 29 Status indicator 30 DC input terminal Do not use any other AC adaptors except...
Selecting a mode Change the mode to recording or playback. Operate the mode switch to change the mode to Motion Picture Recording Mode Still Picture Recording Mode Playback Mode How to use the touch screen You can operate by directly touching the About the operation icons LCD monitor (touch screen) with your finger.
6 Service Mode 1. Indication method of the service menu Set the mode switch “Motion Picture Recording” mode. 2. Turn the power on, and then while keep pressing the “Zoom lever” to W side, “Intelligent auto/Manual” button and “Menu” but- ton for more than 3 seconds until the top screen of the Service Mode Menu being displayed.
6.1. Lock Search History Indication Touch the [ 4 ] of LCD, select Lock search history indication. Operation specifications Indication contents • Lock search history indication Display the camera system error cord for three histories saved in EEPROM. • The error cord contents which are displayed Error code Function Focus control is abnormal...
7 Service Fixture & Tools 7.1. When Replacing the Main P.C.B. After replacing the MAIN P.C.B., be sure to achieve adjustment. The adjustment instruction is available at “software download” on the “Support Information from NWBG/VDBG-AVC” web-site in “TSN system”, together with Maintenance software. 7.2.
8 Disassembly and Assembly Instructions 8.1. Disassembly Flow Chart This is a disassembling chart. When assembling, perform this chart conversely. 8.2. PCB Location...
9 Measurements and Adjustments 9.1. Electric Adjustment • Adjustment method is different from a conventional High definition video camera. • An exclusive jig and PC (including software for adjustment “Tatsujin”) are necessary for electric adjustment. • A USB driver for service is necessary to communication with PC. •...
Page 30
Adjustment Items • Adjustment item as follows. The adjustment instruction is available at "Software download" on the "Support Information from NWBG/VDBG-AVC" web-site in "TSN System".
10 Factory Setting 10.1. How To Turn On The Factory Settings? 1. Set the mode switch “Motion Picture Recording” mode. 2. Turn the power on, and then while keep pressing the “Zoom lever” to W side, “Intelligent auto/Manual” button and “Menu” but- ton for more than 3 seconds until the top screen of the Service Mode Menu being displayed.
Page 32
"Standard-Playback" mode when there is no specify mode is mentioned. Model No. HDC-SDX1P 4.Although the voltage and waveform available on here is measured with standard frame, it may be differ from actual measurement due to modification of circuit and so on.
S2. Voltage Chart Note) Indicated voltage values are the standard values for the unit measured by the DC electronic circuit tester (high-impedance) with the chassis taken as standard. Therefore, there may exist some errors in the voltage values, depending on the internal impedance of the DC circuit tester. S2.1.
S3. Block Diagram S3.1. Overall Block Diagram NOTE : VIDEO SIGNAL : AUDIO SIGNAL : CLK or CONTROL LINE LENS(F1.8-2.6 16.8x) IC201 ZOOM/ MOS IMAGE FOCUS IRIS/ SENSOR MOTOR/ Digital COLOR LCD PANEL X301 (72MHz) IC701 Analog LENS/OIS DRIVE MULTI Analog TERMINAL Analog...
S4. Schematic Diagram S4.1. Interconnection Diagram SIDE CASE R UNIT FRONT CASE UNIT SIDE-R OP FPC MOS UNIT OPERATION SW FLASH LENS UNIT OPERATION SW POWER FPC ECM FPC BATTERY FLASH P.C.B. MOS FPC (FOIL SIDE) : (COMPONENT SIDE) SIDE CASE L UNIT PS7001 PP6002 SPEAKER...
S6. Replacement Parts List Note: 1.* Be sure to make your orders of replacement parts according to this list. 2. IMPORTANT SAFETY NOTICE Components identified with the mark have the special characteristics for safety. When replacing any of these components, use only the same type. 3.
Page 43
HDC-SDX1P-H Ref.No. Part No. Part Name & Description Remarks Ref.No. Part No. Part Name & Description Remarks R3904 ERJ2GEJ271 M.RESISTOR CH 1/10W 270 VEP03H95A FLASH P.C.B. UNIT 1 (RTL) E.S.D. R3905 ERJ2GEJ331 M.RESISTOR CH 1/16W 330 VEP03H96A SD HOLDER P.C.B.
Page 44
HDC-SDX1P-H Ref.No. Part No. Part Name & Description Remarks Ref.No. Part No. Part Name & Description Remarks VYK4J47 TOP ORNAMENT UNIT 1 (-H) VYK4J50 TOP ORNAMENT UNIT 1 (-V) VYK4F12 SIDE CASE(L) UNIT 1 (-H) VYK4F13 SIDE CASE(L) UNIT 1 (-V)
Page 45
HDC-SDX1P-H Ref.No. Part No. Part Name & Description Remarks Ref.No. Part No. Part Name & Description Remarks VEP03H95A FLASH P.C.B. UNIT 1 (RTL) E.S.D. VXK1947 LENS ANGLE UNIT VXK1948 TL FRAME UNIT VSC6238 RADIATION PLATE VEP03H94BN MAIN P.C.B. UNIT 1 (RTL) E.S.D. P VEP03H94BP MAIN P.C.B.
Page 46
HDC-SDX1P-H Ref.No. Part No. Part Name & Description Remarks Ref.No. Part No. Part Name & Description Remarks VMP9730 LCD FRAME K0RE00400006 LCD CASE UNIT(W/SW) VYK3Q88 PANEL UNIT LSGL1526 LIGHT GUIDE PLATE VGL1333 REFLECTION SHEET VEP26333A MONITOR P.C.B. UNIT 1 (RTL) E.S.D.
Page 47
HDC-SDX1P-H Ref.No. Part No. Part Name & Description Remarks Ref.No. Part No. Part Name & Description Remarks BATTERY PACK K1HY12YY0004 MULTI D/RCA CABLE K1HY04YY0032 USB CABLE K2CA2CA00025 AC CABLE VSK0711 AC ADAPTOR VSK0712 AC ADAPTOR 1 EC,EG,GC VGQ0C14 STYLUS PEN...
S7. Exploded View S7.1. Frame and Casing Section (1) About the Built-in Microphone To maintain performance, Front case unit (Ref No. 25) Is supplied S-17...