Samsung SNP-3370 User Manual page 58

Chapter 4. Using Web Viewer
Turbo Enable
This function accelerates the speed of the PTZ operations in proportion to the period for
which the PTZ button is pressed.
For example, hitting the PTZ button once activates the operation at slow speed, but the
speed increases so long as you are holding down the button.
OSD Setting
Camera ID : Displays or hides the ID of the current camera on the screen.
Sequence Status : Displays or hides the status of a sequence action that is in progress.
PTZ Position : Displays or hides the status of the Pan, Tilt, and Zoom operation that is in
progress.
Initialize
Camera Default : Use this function when replacing the camera's zoom module; uploads
the settings of the previous module to a new module. Make sure to
keep the camera turned off while replacing the module and then use
this function.
Auto Refresh : Optimizes the electronic circuits and components of the camera on a
regular basis. This function is useful to maintain and restore the current
settings of the camera. Use it after the camera has been facing a strong
light source directly for a long time, or when the settings have changed
after the camera has repeatedly rotated to capture the video of an area
over a long period.
- OFF, 1~7 Days : OFF disables Auto Refresh while 1 to 7 Days performs it at selected
intervals.
Auto Refresh takes approximately 10 seconds to finish. If Auto Refresh activates in
the middle of a sequence action, the camera pauses the sequence action and
performs an Auto Refresh, then resumes the sequence action once the refresh is
complete.
Status
Displays the settings and version of the dome camera.
- Cam Model : Indicates the model name of the camera.
- Protocol : Indicates the type of protocol that is used for the camera.
- Duplex : Supports one- and two-way communications.
- Baud Rate : Displays the selected baud rate.
NETWORK PTZ CAMERA
58
User Guide