Power Failure Indicator - Lorex WIRELESS HOME MONITORING SYSTEM User Manual

Power failure indicator

A power failure may interrupt recording modes on the system. After power is restored, the
following will occur:
• The system will restart in Auto Sequence mode + Motion Recording - this ensures that some
form of recording will be immediately active on the system.
NOTE: If you had a different display view or recording mode set when the power failure
occurred, you will need to re-apply the previous display view and recording mode.
• A Power Failure icon (
failure occurred while the system was actively recording (i.e. "REC" icon was on-screen).
NOTE: The icon appears only if the system was actively recording when the power failure
occurred. The icon will disappear when you press buttons on the receiver.
NOTE: Video files are saved every 10 minutes of recording. If a power failure occurs during
recording, recordings from up to 10 minutes before the power failure occurred will
not be saved.
) appears on-screen. The Power Failure icon indicates that a power
Power failure indicator
Power Failure icon
57