Can I Use The Ray240 As Part Of An Integrated System - Raymarine Ray240 User Manual

11
A Marcom-C VHF radio has the following restrictions:
• ATIS is permanently enabled. You will be unable to disable ATIS operation.
Marcom-C operation is set by the dealer at point of sale. If you wish to enable or
disable Marcom-C mode, you must contact your Raymarine dealer.
For further information, please contact Raymarine technical support.

1.4 Can I use the Ray240 as part of an integrated system?

Your Ray240 can send and receive position information, e.g. latitude and
longitude, using either of the following protocols:
• National Maritime Electronics Association (NMEA) 0183.
• SeaTalk
enabling DSC integration with other instruments.
Using these protocols enables your Ray240 to send position information to other
instruments in your system whenever it receives:
• a response to a DSC position request.
• a DSC Distress call.
You can also add an additional handset and active speaker to the standard
Ray240, giving two fully functional stations with an intercom function. This is
particularly useful where your boat has dual helms or a second navigation station.