Automatic Transmission Identification System; Waste Electrical And Electronic Equipment Directive; Handbook Information; Warranty - Raymarine Ray240 User Manual

Important Information
If regulations in your area do not permit you to program the MMSI number
yourself, your Raymarine dealer can program the number for you.
For full details of programming your MMSI number into the Ray240 - see
Chapter 3:Installation

Automatic Transmission Identification System

Some European inland waterways require the use of the Automatic Transmission
Identification System (ATIS). An ATIS number can be requested from the same
agency that issues radio operator licenses in your area.

Waste Electrical and Electronic Equipment Directive

The Waste Electrical and Electronic Equipment (WEEE) Directive requires the
recycling of waste electronic and electrical equipment. Whilst the WEEE Directive
does not apply to some of Raymarine's products, we support its policy and ask you
to be aware of how to dispose of this product.
The crossed out wheeled bin symbol, illustrated above, and found on our product
signifies that the product should not be disposed of in general waste or landfill.
Please contact your local dealer, national distributor or Raymarine Technical
Services for information on product disposal.

Handbook information

To the best of our knowledge, the information in this handbook was correct as it
went to press. However, our policy of continuous product improvement and
updating may change specifications without prior notice. As a result, unavoidable
differences between the product and handbook may occur from time to time.
Raymarine cannot accept liability for any inaccuracies or omissions it may
contain.
For the latest product information visit our website:

Warranty

To register your new Raymarine product, please take a few minutes to fill out the
warranty card. It is important that you complete the owner information and
return the card to us to receive full warranty benefits.
.
www.raymarine.com
7