JVC KD-APD89 Instructions Manual page 42

_ 4 2
Symptoms
• Bluetooth device does not detect the unit.
• The unit does not detect the Bluetooth
device.
• The unit does not make pairing with the
Bluetooth device.
• Phone sound quality is poor.
• The sound is interrupted or skipped during
playback of aBluetooth.
au~iQ
player.
• The connected audio player cannot be
controlled.
Remedies/Causes
The unit can be connected with one Bluetooth cellular
· phone and one Bluetooth audio device at atime.
, While connecting adevice, this unit cannot be detected
·from another device. Disconnect currently connected
, device and search again.
• Check the Bluetooth setting of the device.
• Search from the Bluetooth device. After the device
detects the unit, select "Open..."on the unit to connect
the device. (See page' 3.)
• Enter the same PIN code for both the unit and target
device.
• Select the device name from "Special:' then try to
connect again. (See page 13.)
•• Reduce the distance between the unit and the
Bluetooth cellular phone.
• Move the car to a place where you can get abetter
signal reception.
• Reduce the distance between the unit and the
Bluetooth audio player.
• Disconnect the device connected for "BT-PHONE."
• Turn off, then turn on the unit.
• Connect the player again, when the sound is not yet
restored.
Check whether the connected audio player supports
· AVRCP (Audio Video Remote Control Profile).
(Operations depend on the connected audio player.)