Hitachi CP-X8150 User Manual page 97

USB Display (continued)
This application will appear as an icon in the
Windows notification area once it starts. You can quit
the application from your computer by selecting "Quit"
on the menu.
NOTE
• The "LiveViewer" (refer to the
Network Guide) and this application cannot
be used at the same time. If you connect your
computer to the projector by using a USB cable
while the "LiveViewer" is running, the following message will be displayed.
• Depending on the software installed on your computer, images on your
computer cannot be transferred using "LiveViewer Lite for USB".
• If any application software having the firewall function is installed into your
computer, make the firewall function invalid with following the user's manual.
• Some security software may block image transmission. Please change the
security software setting to allow the use of "LiveViewer Lite for USB".
• When the audio input from USB TYPE B (50) is selected, if the sound level
is still low even after raising the volume level in the projector to the maximum,
check whether your computer outputs audio and raise the volume level
accordingly.
Presentation tools
97