Adjusting The Lens - Hitachi CP-X8150 User Manual

Hitachi projector user's manual (detailed) operating guide
Hide thumbs Also See for CP-X8150:
Table of Contents

Advertisement

Adjusting the lens

Adjusting the zoom and focus
The ZOOM or FOCUS dialog will appear when you
press any of the buttons from ZOOM, ZOOM -,
ZOOM +, FOCUS + and FOCUS -.
1.
Use the ZOOM + / - buttons on the remote
control or ZOOM button and ◄/► cursor buttons
on the projector to adjust the screen size.
2.
Use the FOCUS + / - buttons to focus the picture.
NOTE
• The projector may ignore operation by
other buttons while the lens is moving.
Adjusting the lens position
Press the LENS SHIFT button. The LENS SHIFT
dialog will appear. Using the ▲/▼/◄/► buttons while
the dialog is displayed shifts the lens. Generally, bet-
ter image quality can be got when the lens is set to
the center.
Press the LENS SHIFT button again to exit the LENS
SHIFT function.
CENTERING
Press the ENTER or INPUT button while the dialog is
displayed to execute the CENTERING feature, which
adjusts the lens to the center. A message dialog is
displayed for confirmation. Pressing the ►button
performs CENTERING. You can also perform
CENTERING in the standby mode by pressing the
FUNCTION and LENS SHIFT buttons on the control
panel for 3 seconds at the same time.
CAUTION
moving lens could catch them in the space around the lens and result in an injury.
NOTE
• While the lens is moving to the center, the menu will disappear and an
hourglass icon will appear on the screen. CENTERING may take some time till the
lens reaches the center.
• The projector may ignore operation by buttons while moving the lens.
• The CENTERING feature while the projector is in the standby mode is disabled if
the STANDBY MODE item of SETUP menu is set to SAVING. Perform CENTERING
before the projector's power is turned off, or set the STANDBY MODE to NORMAL.
• The adjustable range of LENS SHIFT varies depending on the lens unit mounted on
the projector to maintain picture quality. Therefore LENS SHIFT adjustment may not
reach the end of the indicator in the dialog, and that is not a failure.
►Do not put your fingers or any other things around the lens. The
Operating
LENS SHIFT button
ZOOM + / - buttons
FOCUS + / - buttons
LENS SHIFT
button
ZOOM button
FOCUS - / +
FUNCTION
buttons
button
25

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cp-wx8240

Table of Contents