Hitachi CP-X8150 User Manual page 12

Setting up
Connecting with your devices (continued)
Access
point
(69)
USB
wireless
adapter
(optional)
(69)
USB
storage
device
(86)
CAUTION
to obtain the consent of the administrator of the network.
►Do not connect the LAN port to any network that might have the excessive
voltage.
►The designated USB wireless adapter that is sold as an option is required to
use the wireless network function of this projector.
►Before removing the USB storage device from the port of the projector, be
sure to use the REMOVE USB function on the Thumbnail screen to secure your
data (89).
►Do not use any extension cable or device when connecting the adapter to the
projector. Before you insert or pull out the USB wireless adapter from the projector,
turn off the power of the projector and pull out the power cord's plug from the outlet.
Do not touch the USB wireless adapter while the projector is receiving AC power.
►To connect both the LAN cable and USB device to the projector, use only the
further USB TYPE A port from the LAN port or a LAN cable that is flat on the
side where the plug's wire is visible. Otherwise, both of them cannot be con-
nected correctly, or the wire may break (malfunction).
NOTE
• If an oversized USB storage device blocks the LAN port, use only the
further USB TYPE A port from the LAN port or a USB extension cable to con-
nect the USB storage device.
(continued on next page)
12
(69)
► Before connecting the projector to a network system be sure
(19)
Computer
External
device