Hitachi CP-X8150 User Manual page 29

Correcting the distortion (continued)
 MANUAL:
When MANUAL is pointed at, pressing the ► or
ENTER button displays the KEYSTONE_MANUAL
dialog.
1.
Select the vertical or horizontal keystone (
) with the ▲/▼ buttons.
2.
Use the ◄/► buttons to adjust the keystone distortion.
NOTE
• When the zoom adjustment is set to the TELE (telephoto focus), this
function may be excessive. This function should be used when the zoom ad-
justment is set to the full WIDE (wide-angle focus) whenever possible.
• When the vertical lens shift is not set fully upward, this function may not work
well.
• Point at RETURN in the dialog with the ▲/▼ buttons and press ◄ or ENTER
button to return to the KEYSTONE menu.
 PERFECT FIT:
When PERFECT FIT is pointed at,
pressing the ► or ENTER button
displays the KEYSTONE_PERFECT
FIT dialog.
This projector is equipped with a test
pattern for PERFECT FIT. Select
the test pattern icon
lower left of the dialog with the ◄/▼
buttons. When you press the ENTER
or INPUT button, the test pattern
appears or disappears.
1.
If it is necessary to initialize the current adjustment, point at RESET in the
dialog with the RESET button, and press the ENTER or INPUT button.
2.
Select one of the corners or sides to be adjusted with the ▲/▼/◄/►
buttons and press the ENTER or INPUT button.
(continued on next page)
shown in the
/
Operating
29