Connecting To A Television And A Satellite Receiver - Panasonic Diga DMR-EZ28 Operating Instructions Manual

Basic Connection
Connecting to a Television and a Satellite Receiver
• Consult your satellite service provider about the appropriate satellite receiver to use.
• Additional coaxial cable and audio/video (AV) cable are required.
• If your TV does not have AV IN terminals (-+ 61).
Note: The terminals on the rear of your TV and Satellite Receiver may not appear as shown below.
Please read terminal labels carefully to ensure correct connections.
step
o
VHF/UHF
RF IN
Satellite
anten na
~'I-----t
step
!
To a household AC outlet
®
(AC 120 V, 60 Hz)
[®]
o
75 0 coaxial cable from the satellite antenna to the "SATELLITE IN" on the satellite receiver.
a
750 coaxial cable (included) from the "RF OUT" on the satellite receiver to the "VHF/UHF
RF
IN" on the TV.
a
Audio/video cable (included) from the "OUT" on the unit to the "AV IN" on the TV.
o
Audio/video cable from the "AV OUT" on the satellite receiver to the "IN1" on the unit.
e
AC power supply cord (included) from the "AC IN-" on the unit to a household AC outlet.
G
RQT9046