Automatic Tuning - Sony STR-DH190 Operating Instructions Manual

Tuner
Tuning to a FM Station
Automatically

(Automatic Tuning)

You can listen to FM broadcasts through
the built-in tuner. Before operation, make
sure you have connected the FM antenna
(aerial) to the receiver (page 18).
1
Press FM.
2
Press TUNING + or TUNING –.
TUNING + scans from lower to higher
frequency stations and TUNING – for
scanning higher to lower.
The receiver stops scanning whenever
a station is received.
Using the control buttons on the
receiver
1 Turn INPUT SELECTOR to select "FM
TUNER".
2 Press TUNING MODE repeatedly to
select "AUTO".
3 Press TUNING + or TUNING –.
GB
24
In case of poor FM stereo reception
If the FM stereo reception is poor and "ST"
flashes on the display panel, select
monaural audio to lessen the sound
distortion.
Press AMP MENU, and then press / and
To return to the stereo mode, select
"STEREO".
FM
/ ,
AMP MENU
TUNING +/–
to select "FM MODE" – "MONO".