Internal Connectors - Asus A58M-K Manual

Audio 2.1, 4.1, 5.1, or 7.1-channel configuration
Port
Light Blue (Rear panel)
Lime (Rear panel)
Pink (Rear panel)
Lime (Front panel)
To configure a 7.1-channel audio output:
7. USB 2.0 ports. These 4-pin Universal Serial Bus (USB) ports are for USB 2.0/1.1
devices.
8. DVI-D port. This port is for any DVI-D compatible device. DVI-D can't be converted to
output RGB Signal to CRT and isn't compatible with DVI-I.
PS/2 Keyboard port (purple). This port is for a PS/2 keyboard.
9.
1.7.2

Internal connectors

1. CPU and chassis fan connectors (4-pin CPU_FAN, and 4-pin CHA_FAN)
Connect the fan cables to the fan connectors on the motherboard, ensuring that the
black wire of each cable matches the ground pin of the connector.
A58M-K
A58M-K Fan connectors
DO NOT forget to connect the fan cables to the fan connectors. Insufficient air flow inside
the system may damage the motherboard components. These are not jumpers! DO NOT
place jumper caps on the fan connectors.
•
•
1-14
Headset 2.1-
4.1-channel
channel
Line In Rear Speaker Out Rear Speaker Out
Line Out Front Speaker Out Front Speaker Out Front Speaker Out
Mic In
—
Use a chassis with HD audio module in the front panel to support a 7.1-channel audio
output.
CPU_FAN
The CPU_FAN connector supports a CPU fan of maximum 2A (24 W) fan power.
The CPU_FAN and CHA_FAN connectors support the ASUS Fan Xpert feature.
5.1-channel
Mic In Bass/Center
— —
CHA_FAN
Chapter 1: Product introduction
7.1-channel
Rear Speaker Out
Bass/Center
Side Speaker Out