Car Type Selection; Speaker Setting - Kenwood KDC-X994 Instruction Manual

DSP Setup
SRC MENU VOL
4 ¢

Car Type Selection

You can compensate the delay of the sound arrival
time by selecting your environment from the
following car types.
Display Overview
"OFF" Not compensating.
"Compact" Compact car
"Full size car" Full size car
"Wagon" Station wagon
"Minivan" Minivan
"SUV" Sport-utility vehicle
"Minivan (Long)" Long Minivan
1
Select the source
Press the [SRC] button. Turn the [VOL] knob and
press it when the desired item is displayed.
Select a source other than "STANDBY".
✍ SRC Select mode 2: Pressing the [SRC] button
repeatedly switches source.
2
Enter Audio Control mode
Press the [VOL] knob.
3
Enter Cabin select mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select "Detailed Setup"
4
Select the car type
Press the [4] or [¢] button.
5
Set the value
Press the [VOL] button.
6
Exit Audio Control mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
⁄
• You can compensate the distances in more details by
using <Car Type Fine Adjustments> (page 43)
42
|
KDC-X994/ KDC-BT945U/ KDC-X794/ KDC-MP745U
( : Factory setting)
> "Car Type".
function.

Speaker Setting

The speaker X'Over is automatically set when the
position and size of each speaker are selected from
the following items.
Speaker Item Range
"FRONT" "SIZE" Speaker Size Front
KDC-X994/ KDC-X794:
"O.E.M.", "4inch", "5inch", "6 1/2inch",
"6 3/4inch", "7inch", "4x6", "5x7", "6x8",
"6x9", "7x10"
KDC-BT945U/ KDC-MP745U:
"Small", "Medium", "Large"
"LOCATION" Speaker Location Front
"Door", "On Dash", "Under Dash"
"TWEETER" Speaker Size Tweeter
"None", "Use"
"REAR" "SIZE" Speaker Size Rear
KDC-X994/ KDC-X794:
"None", "O.E.M.", "4inch", "5inch",
"6 1/2inch", "6 3/4inch", "7inch", "4x6",
"5x7", "6x8", "6x9", "7x10"
KDC-BT945U/ KDC-MP745U:
"None", "Small", "Medium", "Large"
"LOCATION" Speaker Location Rear
• "Door", "Rear Deck"
• "2nd Row", "3rd Row" (Car Type:
"SUB W" "SIZE" Speaker Size Subwoofer
KDC-X994/ KDC-X794:
"None", "6 1/2inch", "8inch", "10inch",
"12inch", "15inch Over"
KDC-BT945U/ KDC-MP745U:
"None", "Small", "Large"
1
Select the source
Press the [SRC] button. Turn the [VOL] knob and
press it when the desired item is displayed.
Select a source other than "STANDBY".
✍ SRC Select mode 2: Pressing the [SRC] button
repeatedly switches source.
2
Enter Audio Control mode
Press the [VOL] knob.
3
Enter Speaker setting mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select "Detailed Setup"
4
Select the item you want to set
Operation type
Selects the item.
Adjust each item.
Set the value
"Minivan", "Minivan (Long)")
( : Factory setting)
>
"Speaker".
Operation
Turn the [VOL] knob.
Press the [4] or [¢] button.
Press the [VOL] button.