Clock And Other Functions; Clock And Date Adjustment; Initial Settings - Kenwood KDC-X994 Instruction Manual

Clock and Other Functions

Release
MENU VOL
4 ¢
SRC

Clock and Date Adjustment

You can adjust the clock and date.
Display Overview
"Settings"
"Clock & Date"
"Clock Adjust" Sets the clock.
"Time Synchronized" Synchronizing the RDS station time
data and this unit's clock. (KDC-X994/
KDC-X794 only)
"OFF"/ "ON"
"Date Adjust" Sets the date.
"Date Mode Select" Sets the date display mode.
1
Enter Menu List mode
Press the [MENU] button.
2
Select RDS's automatic time adjustment
(KDC-X994/ KDC-X794 only)
Turn the [VOL] knob and press it when the
desired item is displayed.
>
Select "Settings" "Clock & Date"
>
Synchronize" "ON" or "OFF".
When selected "OFF", proceed to step 3.
When selected "ON", proceed to step 5.
3
Enter Clock adjustment mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select "Settings" > "Clock & Date"
Adjust".
4
Adjusting Clock
1. Turn the [VOL] knob to set the hours.
2. Press the [¢] button.
3. Turn the [VOL] knob to set the minutes.
4. Press the [VOL] knob.
5
Enter Date adjustment mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select "Date Adjust".
6
Adjusting Date
1. Turn the [VOL] knob to adjust the year.
34
|
KDC-X994/ KDC-BT945U/ KDC-X794/ KDC-MP745U
2. Press the [¢] button.
3. Turn the [VOL] knob to adjust the month.
4. Press the [¢] button.
5. Turn the [VOL] knob to adjust the day.
6. Press the [VOL] knob.
7
Enter Date format mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select "Date Mode Select".
8
Select Date format
Turn the [VOL] knob and press it when the
desired item is displayed.
Select from 7 types.
9
Exit Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.

Initial Settings

You can select following Initial Setting items.
1
Select the Standby
Press the [SRC] button. Turn the [VOL] knob and
press it when the desired item is displayed.
Select the "STANDBY" display.
✍ SRC Select mode 2: Pressing the [SRC] button
repeatedly switches source.
2
Enter Menu List mode
>
"Time
Press the [MENU] button.
3
Enter Initial Setting mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select "Initial Settings".
4
Select the setting item to adjust
Turn the [VOL] knob.
> "Clock
Display
"Initial Settings"
"SRC Select"
"Beep"
"Menu Language" You can select the display language for the
Overview
Sets the source selection method.
"Settings 1"/ "2"
Setting the operation check sound (beep sound)
ON/OFF.
"OFF"/ "ON"
Menu list item.
"English"/ "Français"/ "Español"