Dsp Setup; Car Type Selection; Speaker Setting - Kenwood DPX404U Instruction Manual

Function of DPX504U

DSP Setup

SRC
4 ¢
Car Type Selection
You can compensate the delay of the sound arrival
time by selecting your environment from the
following car types.
Display Overview
"OFF" Not compensating.
"Compact" Compact car
"Sedan" Sedan
"Wagon" Station wagon
"Minivan" Minivan
"SUV" Sport-utility vehicle
"Passenger Van" Passenger van
1
Select the source
Press the [SRC] button.
Select a source other than "STDBY".
2
Enter Function setting mode
Press the [VOL] knob.
3
Enter Cabin select mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select "Audio Control"
"Car Type".
4
Select the car type
Turn the [VOL] knob to select the car type, and
then press the [VOL] knob.
5
Exit Function setting mode
Press the [ ] button for at least 1 second.
⁄
•
You can compensate the distances in more details by using
<Car Type Fine Adjustments> (page 55)
54
|
DPX504U/ DPX404U/ DPX304
VOL
( : Factory setting)
> >
"Detailed Setup"
function.
Speaker Setting
The speaker X'Over is automatically set when the
position and size of each speaker are selected from
the following items.
Speaker Item Range
"Front" "SIZE" Speaker Size Front
"O.E.M.", "10cm", "13cm", "16cm",
"17cm", "18cm", "4x6", "5x7", "6x8",
"6x9", "7x10"
"LOCATION" Speaker Location Front
"Door", "On Dash", "Under Dash"
"TWEETER" Speaker Size Tweeter
"None", "Use"
"Rear" "SIZE" Speaker Size Rear
"None", "O.E.M. " , "10cm", "13cm",
"16cm", "17cm", "18cm", "4x6", "5x7",
"6x8", "6x9", "7x10"
"LOCATION" Speaker Location Rear
• "Door", "Rear Deck"
• "2nd Row", "3rd Row" (Car Type:
"SubWoofer" "SIZE" Speaker Size Subwoofer
"None", "16cm", "20cm", "25cm",
"30cm", "38cm Over"
1
Select the source
Press the [SRC] button.
Select a source other than "STDBY".
2
Enter Function setting mode
Press the [VOL] knob.
3
Enter Speaker setting mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select "Audio Control"

"Speaker Setting".

4
Select the item you want to set
Operation type
Selects the item.
Adjust each item.
Set the value
5
Exit Function setting mode
Press the [ ] button for at least 1 second.
"Minivan", "Passenger Van")
( : Factory setting)
> >
"Detailed Setup"
Operation
Turn the [VOL] knob.
Press the [4] or [¢] button.
Press the [VOL] knob.