Bluetooth Audio Operation; Connecting A Bluetooth Device; Basic Operation - Kenwood KDC-X994 Instruction Manual

Function of KDC-X994/ KDC-BT945U
KDC-X794/ KDC-MP745U with BT200 (Optional Accessory)

Bluetooth Audio Operation

SRC MENU VOL
4 38 ¢

Connecting a Bluetooth Device

Before use the Bluetooth device, you need to
connect Bluetooth device to this unit.
Pairing (Registering from Bluetooth devices)
To make your Bluetooth Audio player usable with
this unit, you need to register it (pairing).
1
Turn on this unit
Press the [SRC] button.
2
Start registering this unit by operating the
Bluetooth device
By operating the Bluetooth device, register the
audio player (pairing). Select "KENWOOD BT CD/R-
4P1"/ "KCA-BT200" from the list of connected units.
3
Enter a PIN code
Input the PIN code ("0000") in the Bluetooth
device.
Check that registration is complete on the
Bluetooth device.
✍ PIN code is set to "0000" as the default. You can
change this code. Refer to
Code> (page 50).
4
By operating the Bluetooth device, start
Bluetooth connection.
⁄
• If pairing does not succeed, try followings.
– P IN code is set to "0000". See <Registering PIN Code>
(page 50)
– Turn off the power of this unit and turn it back on. And
then try the pairing operation again.
– If other audio players have been registered, delete
them. And then try the pairing operation again. See
<Deleting a Registered Bluetooth device> (page 51)
• When registering from this unit, refer to <Registering
Bluetooth device> (page
• For details on the Bluetooth Audio player which can be
connected, see <About the Bluetooth Audio player>
(page 63).
/PLAY MODE
<Registering PIN
49).

Basic Operation

Selecting Bluetooth Audio source
Press the [SRC] button. Turn the [VOL] knob and
press it when the desired item is displayed.
Select the "BT Audio" display.
✍ SRC Select mode 2: Pressing the [SRC] button
repeatedly switches source.
Pause and play
Press the [38] button.
Music Search
Press the [4] or [¢] button.
⁄
• All or some of the operations above cannot be
performed if the Bluetooth audio player is not ready for
remote control.
• Switching to the Bluetooth audio source does not start
or stop playback automatically. Perform the operation for
starting or stopping playback.
• Some audio players cannot be controlled remotely or
reconnected after Bluetooth disconnection. Operate the
main unit of the audio player to connect Bluetooth.
23
|
English