Clock And Other Functions; Clock Adjustment; Initial Settings - Kenwood DPX308U Instruction Manual

Clock and Other Functions

SRC
4 ¢
B.BOOST

Clock Adjustment

You can adjust the clock.
1
Enter Clock adjustment mode
Press the [B.BOOST] button for at least 1
second.
The hour display blinks.
2
Adjust the hour
Turn the [VOL] knob to adjust the hour, and
then press the [VOL] knob.
The minute display blinks.
3
Adjust the minute
Turn the [VOL] knob to adjust the minute, and
then press the [VOL] knob.
Finish the Clock Adjustment.
28
|
DPX308U
VOL

Initial Settings

You can select the following Initial Setting items.
1
Select the Standby
Press the [SRC] button.
Select the "STANDBY" display.
2
Enter Function setting mode
Press the [VOL] knob.
3
Enter Initial Setting mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select "INITIAL SET".
4
Select the setting item to adjust
Turn the [VOL] knob.
Display Overview
"INITIAL SET"
"PRESET TYPE" Sets the Tuner preset type.
"TYPE NORMAL": 1 station can be assigned to 1
preset button in each of 4 bands (FM1, FM2,
FM3, and AM), i.e., a total of 24 stations (6
stations x 4 bands) can be preset.
"TYPE MIXED": A total of 6 stations can be
assigned to a total of 6 preset buttons
regardless of band (FM1, FM2, FM3, and
AM). You can recall a preset station without
switching between bands.
"KEY BEEP" Setting the operation check sound (beep sound)
ON/OFF.
"ON"/ "OFF"
"BUILT-IN AUX" When this is set to ON, AUX source can be
selected.
"ON": Allows AUX source to be selected. Use
this setting when the built-in AUX terminal
is connected to the external equipment all
the time.
"OFF": Disable AUX source selection. Use this
setting when the built-in AUX terminal is
not used.
"CD READ" Sets the CD read mode.
"1": Automatically distinguishes between Audio
file disc and music CD when playing disc.
"2": Forces playing as music CD.
"SWITCH PREOUT" Switches the preout between rear output and
subwoofer output.
"REAR": Rear output
"SUB-W": Subwoofer output
"SP SELECT" Fine-tuning so that the System Q value is
optimal when setting the speaker type as
follows;
"SP OFF": Off
"SP 5/4": For 5 & 4 in. speaker
"SP 6* 9/6": For 6 & 6x9 in. speaker
"SP OEM": For the OEM speaker