Function of KDC-BT50U/ KCA-BT200 (Optional Accessory)
Bluetooth Audio Operation
Before Use
• For details on the Bluetooth Audio player which
can be connected, see
player> (page
35).
• You need to register your Bluetooth Audio player
before using it with this unit. For more details, see
<Registering Bluetooth device> (page
• You need to select the Bluetooth audio player you
wish to connect. Refer to
device You Wish to Connect> (page
Basic Operation
Selecting Bluetooth Audio source
Press the [SRC] button.
Select the "BT AUDIO" (
EXT" (
KDC-5047U KMR-440U
For how to select source item, refer to
source selection> (page
Pause and play
Press the [
] button.
Music Search
Push the Control knob towards right or left.
⁄
•
All or some of the operations above cannot be performed if
the Bluetooth audio player is not ready for remote control.
•
Switching between Bluetooth audio sources does not start
or stop playback automatically. Perform the operation for
starting or stopping playback.
•
Some audio players cannot be controlled remotely or
reconnected after Bluetooth disconnection. Operate the
main unit of the audio player to connect Bluetooth.
•
When "2Zone" is set to "ON" and "2Zone F/R Select" is set to
"Front" of
<Audio Control> (page
cannot be selected.
<About the Bluetooth Audio
28).
<Selecting the Bluetooth
30).
)/ "BT AUDIO
KDC-BT50U
) display.
<Power and
4).
7), Bluetooth Audio source
Autogood products Internet store "130"
27
|
English