Memory Management - Interlogix UltraView PTZ User Manual

Chapter 1 7
Programming

Memory management

If the settings stored in the memory of the housing differ from the settings stored in the memory of the camera
(PTZ), Memory will flash on your monitor. When you log on, you will see the Memory management menu
(Figure 6) asking you to choose which settings you want. The settings you choose overwrite any existing
settings. Until you decide which settings to use, the unit will use the settings stored in the camera. Once the
settings have been successfully transferred, Memory will stop flashing on the monitor.
The Memory management screen appears after the System information screen in the menu sequence. So if the
memory message is flashing, the menu order will be Product information, System information, Memory
management, Program select.
Figure 6. Memory flashing menu
Note: DIP switch settings on the camera can be set to automatically copy the settings from the housing, or push the
settings from the camera to the housing. See the UltraView PTZ Installation Manual for more information.