Touch-Key Receptacle Wiring; Guide; Passenger Compartment; Mounting The Control Unit - Viper 106V Installation Manual

N N O O T T E E : : Please remove all wire description tags from wiring after
connection to the vehicle.
touch-key receptacle wiring guide
Mount the touch-key receptacle in a position accessible to the operator of the vehicle
and so that the LED is visible to the operator. A bracket is provided to allow an addi-
tional mounting method if required.
Plug the touch-key receptacle harness into the wire harness plug from the control mod-
ule.

passenger compartment

mounting the control unit

N N O O T T E E : : The Viper 106V control unit must be installed inside the
vehicle. Under no circumstances should the unit be installed
under the bonnet or other similarly hostile environment.
Select an area behind the dash that will allow you to securely fasten the unit using the
screws provided in the hardware pack. Do not mount the unit near moving parts or
in direct path of air blowing from the heater vents.
N N O O T T E E : : When mounting the control module the metal enclosure
must be used.
© 2004 directed electronics, inc.
7