Fujitsu SPARC Enterprise T2000 Product Notes page 16

6. Reset the Solaris PSH modules as shown.
# fmadm reset cpumem-diagnosis
# fmadm reset cpumem-retire
# fmadm reset eft
# fmadm reset io-retire
7. Reset the faults at the ALOM CMT prompt:
a. Gain access to the ALOM CMT sc> prompt.
Refer to the Advanced Lights Out Management (ALOM) CMT v1.x Guide for
instructions.
b. Run the showfaults -v command to see the UUID of any faults.
sc> showfaults -v
ID Time
0 Jan 27 22:01 hc://product-id=SUNW,SPARC-Enterprise-T2000/
component=IOBD Host detected fault, MSGID:
SUN4-8000-0Y UUID: d79b51d1-aca0-c786-aa50-c8f35ea0fba3
c. Run the clearfault command with the UUID provided in the showfaults
output:
sc> clearfault d79b51d1-aca0-c786-aa50-c8f35ea0fba3
Clearing fault from all indicted FRUs...
Fault cleared.
If faults continue to be reported, the server might have a faulty component. Refer to
the SPARC Enterprise T2000 Server Service Manual for diagnostic procedures.
8 SPARC Enterprise T2000 Server Product Notes • September 2011
FRU Fault