Lcd Screen Messages - Kodak EasyShare M763 Extended User Manual

If...
Cannot transfer
pictures.
(The Add New
Hardware Wizard
cannot locate
drivers.)
Slide show stops or
does not run on an
external video
device.

LCD screen messages

If...
No pictures or
videos to display
Memory card
requires
formatting
Memory card
cannot be read
(Please format
memory card or
insert another
card)
Only one USB
connection
allowed.
Disconnect cable
or rem. (remove)
camera from dock.
www.kodak.com/go/support
Downloaded from ManualsCamera.com Manuals
Try one or more of the following
I
Disconnect the USB cable. (If using camera dock or printer dock,
disconnect cable and remove camera from dock). Close all open
applications. Re-install the software (see
I
Disconnect the USB cable. Close all software applications. Re-install
the software (see
I
Reboot the computer.
I
Try another computer.
I
Adjust the camera Video Out setting NTSC or PAL
I
Make sure the external device settings are correct. (See the device's
user's guide.)
Try one or more of the following
I
Change image storage location setting
I
Insert a new card (see
Caution: Formatting a card deletes all pictures and videos,
including protected files.
I
Unplug the USB cable from the camera.
page 45).
page 4) or format the card
Troubleshooting
page 45).
(see page
(see page 34).
(see page
35).
35).
53