Expanded Installation Instructions - D-Link DFE-650 Series User Manual

DFE-650 Series Fast Ethernet PC Card User's Guide
LOAD C:\...\DFE650.LAN SLOT=1 FRAME=...
When you have completed the edit for each such line in
STARTNET.BAT, then save STARTNET.BAT and exit from Edit.
If you are uncertain whether the DFE-650 occupies Slot 1 or Slot 2,
and you have entered the wrong slot number, then when you restart
the notebook PC, there will be a diagnostic which advises that "the
PC Card is not present" and there will be no network connection. If
you do not get a network connection upon your restart, then rework
your editing of STARTNET.BAT, entering the alternate PC Card
Slot Number (substitute SLOT=2 in each place where you have
added SLOT=1).
Restart the notebook PC. Excepting the possibility that the wrong
PC Card Slot Number is indicated in STARTNET.BAT, you should
get a NetWare login upon this restart.

Expanded Installation Instructions:

Windows 3.1 Platform in NetWare Network
If your notebook PC station is running Windows 3.1, then you need
to install Client32 for DOS. (Fundamentally, the DFE-650 support
software modules to be installed are the same under Windows 3.1
and DOS. But the Windows 3.1-based installer program
SETUP.EXE does produce a different result from the installation
made by the DOS-based installer, INSTALL.EXE.)
Installing NetWare Client32 for DOS (under Windows 3.1)
Installation of the support software for the DFE-650 can only be
accomplished as part of a new installation, or a re-installation of the
Client32 software on your notebook PC. The NetWare Client32
software includes a Windows-based installer program, SETUP.EXE
which is used for the original installation, and for any necessary re-
installation, of NetWare Client32 for DOS on your station.. Thus
23
Software Installation