D-Link DFE-650 Series User Manual page 26

DFE-650 Series Fast Ethernet PC Card User's Guide
Installing 16-bit NetWare Client for DOS
Installation Director includes a Quick Install option for the DFE-
650 support software required for interoperation with the 16-bit
NetWare Client for DOS. The screen text, status line guide text,
and helptext of Installation Director will assist you through the
Quick Install procedure.
Installing NetWare Client32 for DOS
Installation of the 32-bit support software for the DFE-650 can only
be accomplished as part of a new installation, or a re-installation of
the Client32 software on your notebook PC workstation. The
NetWare Client32 software includes a DOS-based installer
program, INSTALL.EXE, which is used for the original
installation, and for any necessary re-installation, of the Client32
software on your station. Thus INSTALL.EXE is also the
installation program for the DFE-650 support software required for
interoperation with NetWare Client32 for DOS.
Before you can proceed with any of the steps which follow, it will
be necessary for you to find a source for the NetWare Client32
software. Depending on decisions which have been made by the
NetWare administrator for your LAN, the Client32 software may be
available from a NetWare server on the LAN or, alternatively, it
may be necessary for you to install from the Client32 CD-ROM or
diskettes. If you are in doubt as to the proper source for the
Client32 software, please consult your NetWare administrator.
Irrespective which form your source takes, you will need to identify
the directory which holds the Client32 for DOS software. If your
source for the Client32 software is the Novell NetWare 4.11 CD-
ROM, then the appropriate directory will be (assuming that the CD-
ROM drive is E:),
E:\PRODUCTS\DOSWIN32\IBM_6
18
Software Installation