Cleaning Instructions - Wells H336 Owner's Manual

CLEANING INSTRUCTIONS

CAUTION:
ELECTRIC SHOCK
HAZARD
Disconnect hotplate from
electric power before
cleaning.
CAUTION:
BURN HAZARD
Allow hotplate element and
cabinet to cool completely
before cleaning.
CAUTION:
ELECTRIC SHOCK
HAZARD
Do not submerge hotplate in
water.
IMPORTANT: DO NOT spill
or pour water into interior of
hotplate.
IMPORTANT: DO NOT spill
or pour water into controls,
control panel or wiring.
DO NOT submerge
hotplate in water. Damage
to internal components will
occur. Damage to internal
components from water
damage is NOT covered by
warranty.
DO NOT use metal
implements, steel wool or
metal scouring pads to clean
heating elements.
PREPARATION
Unplug or disconnect hotplate from electrical power before cleaning.
Allow hotplate to cool completely before cleaning.
FREQUENCY
Daily
TOOLS
Plastic Spatula and Plastic Scouring Pad
Clean Cloth or Sponge
Mild Detergent or Cleaner Formulated for Stainless Steel
Warm Water
CLEANING
Disconnect hotplate from electrical power and allow heating elements
to cool completely before cleaning.
COILED HEATING ELEMENTS:
Lift coiled heating elements and remove drip pans. Clean drip pans
with a plastic spatula or plastic scouring pad, mild detergent and warm
water. DO NOT use metal implements, steel wool or metal scouring
pads to clean drip pans. Rinse drip pans by wiping with a clean cloth
or sponge dampened with clean water.
Clean heating elements with a plastic spatula or plastic scouring pad,
mild detergent and warm water. DO NOT use metal implements, steel
wool or metal scouring pads to clean elements. Rinse by wiping with a
clean cloth or sponge dampened with clean water.
Reinstall drip pans and gently lower heating element.
FRENCH PLATE HEATING ELEMENTS:
French plate elements do not lift. Clean heating elements with a
plastic spatula or plastic scouring pad, mild detergent and warm water.
DO NOT use metal implements, steel wool or metal scouring pads to
clean elements. Rinse by wiping with a clean cloth or sponge
dampened with clean water.
Dry exposed portions of hotplate unit and control unit by wiping with a
clean soft dry cloth.
6