Setup Menu - Jensen VM8013HD Installation And Operation Manual

SETUP MENU
During disc play, press the SETUP button (4) on the remote control to
access the SYSTEM SETUP menu.
OJ
SETUP MENU
~ol:'2
B
G G
EJ G
(
Language Menu
)
Use the
A, T,
~ or ~ cursor buttons to choose between LANGUAGE,
VIDEO, AUDIO, RATING or
Mise
setup options.
Table 2: System Setup Menu
LANGUAGE MENU
OSD language English Select the appropriate on-screen language for the
Espanol
DVD
Subtitle
English Choose the language you would like subtitles to
French
appear in (if available)
Spanish
Portuguese
German
Off Tum subtitles off
DVD menu English Choose the language you would like DVD menu
French
to appear in (if available)
Spanish
German
Portuguese
VIDEO MENU
Aspect Ratio 4:3
Image is presented with 4:3 aspect ratio.
16:9 Image is presented in wide view with a 16:9
aspect ratio.
Video Format NTSC The color signals are output in the standard NTSC
format.
PAL The color signals are output in the standard PAL
format.
19
Table 2: System Setup Menu
AUTO The color signal output is switchec;t automatically
based on the current video input signal - NTSC or
PAL.
Smart Picture Standard
Bright
Soft
AUDIO MENU
Audio Menu English
Select the appropriate audio language for the
French
DVD.
Spanish
German
Portuguese
RATING MENU
Set Password ---- Enter a 4-digit password to activate the "Rating"
feature. The original password is "‫סס‬OO" and must
be entered before you can change the password
to a different 4-digit code.
Parental CTR 1 KID SAFE Select the appropriate rating level for the intended
2G
audience.
3PG You may override higher ratings by using your
4PG13
password.
S PG-R
6R
7 NC-17
8 ADULT
MiSe MENU
Use Default Yes/No Select "Yes" to restore the factory default settings.
Settings
Demo Run Demo Mode scrolls through the various source
screens, simulating activity on the display. "Demo
Mode" is discreetly dishlayed in yellow text (below
the clock), to indicate t e unit is in Demo Mode. To
stop Demo Mode, press and hold the SRC button.
Auto Run On When "Demo Auto Run" is On, the unit will
automatically display Demo Mode when powered
on.
Off When "Auto Run" is Off, you can select "Demo>
Run" to start Demo Mode.