How To Take A Measurement - Omron IA2 Instruction Manual

How to Take a Measurement

1. Press the START/STOP button and remain still, the cuff will start to
inflate automatically.
As the cuff begins to inflate, the monitor automatically determines
your ideal inflation level. Because this monitor detects the pulse
even during inflation, do not move your arm and remain still until
the entire measurement process has been completed.
Note:
Do not inflate the cuff if it is not wrapped around your arm.
2. Inflation stops automatically and measurement is started.
As the cuff slowly deflates, decreasing numbers appear on the
display and the Heartbeat Symbol (
In rare circumstances, a higher inflation may be necessary. In these
cases, the monitor automatically reinflates the cuff up to 40 mmHg
higher than the initial inflation and restarts the measurement.
Correct Usage
START
STOP
16
) flashes at every heartbeat.
How to Take a Measurement