Table of Contents
Advertisement
1. Channel name set – This option allows the user to title each of the four camera locations.
A total of 8 letters / characters can be used. Use the Volume and channel control buttons
on the control panel to move and set the titles or to save these settings move the cursor to
the EXIT button and press the Menu button.You can also use the Remote control to set
the Title. Use the same volume, channel and menu button on the Remote control.
2. Time and date set – This option allows for the time and date to be adjusted .The date is
displayed as DD/MM/YY.Use the volume and channel control button on the monitor to
change the date,month,year and time.Once finished press the menu button to save and
exit.The channel ,volume and menu buttons on the remote control can also be used to set
the Time and Date.
3. Display mode set – This option allows the user to adjust the OSD options.
a.Date /Time: Use this button to select the DATE, DATE+TIME or OFF.In the OFF setting
the OSD setting is disabled.
b.Position :Displays the positioning of the DATE/TIME/CAMERA tilting.
c.Type:Displays the order of MONTH/DATE/YEAR
d.Loss Position: Displays Video loss warning(when there is a camera loss)
e.Channel name: Displays the positioning or the camera tilting.
4. Alarm Mode – This option sets different alarm settings.
a. Alarm reset time: Adjusts the alarm duration from 0-60 seconds.After the set time the
system will go back to the previous setting.
b. Beep time:Adjusts the 'beep' warning time from 0-60 seconds.
c. Alarm:The alarm can be set to OFF/OSD/OSD+ BUZZER.If just OSD is selected then
the alarm if triggered, will be displayed only on the monitor.
d. Video loss: If there is a picture loss in the camera the system will notify you. Select
between OFF/OSD/OSD+BUZZER option.
5. Sequence – This function is used when monitor is set to auto mode.In Auto sequence
mode the monitor will automatically sequence from cameras 1-4.Adjust the dwell duration
from 0-60 seconds.
6. LOSS/ALARM: If there is a loss of video due to some problem then the time,date and
location of the loss is displayed.
-8-
Advertisement
Table of Contents
