Pentax K-5 II S Operating Manual page 31

Electronic level display
This camera is equipped with an electronic level for detecting whether
the camera is level. When [Electronic Level] is set to
M"'
(On), press
the
INFO
button while the control panel is displayed to view the
electronic level. When [Electronic Level] is assigned to the
RAW /Fx
button, press the
RAW /Fx
button to switch the display on/off.
A bar graph indicating the horizontal camera angle appears at the
bottom of the screen, and a bar graph indicating the vertical camera
angle appears on the right side.
Example:
Horizontally and vertically
level (green)
Outside horizontal level
display (red)
Tilted 5° up (yellow)
Tilted 1.5° to the left (yellow)
Vertically level (green)
Horizontally level (green)
Outside vertical level
display (red}
1r ~;~ 6
• [Electronic Level] is
o
(Off) by default. Set in the [0 Rec. Mode 4]
menu. (p.262)
• Refer to p.249 for assigning a function to the
RAW /Fx
button.
• The electronic level display will disappear if no operations are made
within 1 minute.
• If the camera angle cannot be detected, both ends and the center of
the bar graphs flash red.
•
m
(I)
0'
Ci1
c
tn -·
:s
(,Q
-<
0
r:: ..,
0
D)
3
(I)
Dl