Selecting•theHDMIOutput Format
By default, the maximum resolution is automatically selected to suit the AV
device and camera. However, if it fails to play back images properly,
change the HOM I output format setting.
1
Select [HOM I Out] in the [ ' Set-up 2] menu and press the
four-way controller (..,.. ).
2
Use the four-way controller (
.&.
'f')
to select the HDMI output format.
The maximum resolution that
Auto
the AV device and camera
support is automatically
selected. (default setting)
1080i
1920x1080i
720p
1280x720p
480p
*
1
720x480p
Brightness Level
LCD Color Tuning
Video Out
HDMI Out
USB Connection
Folder Name
Create New Folder
*1 This depends on the selected video output format; [480p] for NTSC and [576p]
(720x576p) for PAL.
3
Press the OK button.
4
Press the MENU button.
The screen that was displayed before selecting the menu appears again.
\.n;;~c,
•
When the HOM I output format is set to [1 080i] or [720p], the display of the AV
device may appear with a screen design that differs from that displayed on
the camera.
• The BrighUDark Area warning is not displayed during Live View.
• When the exposure mode is set to
.!!
(Movie), the output format is fixed to
[480p] regardless of the HOM I output format setting.
-