sawing/cutting
always inspect back/inside of mate-
rial to be cut for electrical wiring,
pipes, or other flammable or pres-
surized material. failure to do so
could result in serious injury or
death.
this multi-tool comes with wood and metal
saw blades and a radial saw blade for cut-
ting a variety of materials.
tips for sawing/cutting:
•
practice on similar scrap material
and inspect results before working on
intended workpiece.
•
use light-to-medium pressure when
cutting to prevent burning workpiece
or damaging multi-tool motor from
overloading.
•
do not use excessive force when mak-
ing cuts. if blades do not cut through
material with light-to-moderate pres-
sure, select an appropriate blade for
the material or replace the blade if it
has become dull.
•
For best results, mark the cutting path
with a pencil, crayon, or chalk line
before beginning the cut.
T25227 (Mfg. since 09/13)
scraping
this multi-tool comes with a scraper for
scraping off fixed adhesives.
tips for scraping:
•
use light-to-medium pressure to avoid
breaking or gouging workpiece.
•
using excessive force will decrease
the life of the multi-tool motor.
•
Keep
scraper
workpiece.
parallel
with
the
-11
-