System Code Setting; Check The System Code Setting - Tecsun S-2000 Owner's Manual

SYSTEM CODE SETTING

To enter different system codes turn off the radio and perform a quick, short press of the ENTER
button with a "B" sound. "
system code as below, then push ENTER to confirm the system code while a long "B--" sounds.
CODE
00 *
20
25
50
09 *
10
29 *
28
76
87 *
88
*
Note: " " means default setting by the manufacturer.

CHECK THE SYSTEM CODE SETTING

Turn off the radio and long press the ENTER button for about 3 seconds, the system settings
show in the display in sequence as "Memory page setting
Time setting and the frequency designated of Timer A and Timer B
" appears on the upper right corner of the display. Enter the
For memory page setting (500 memories)
10 pages; each page 50 memories
20 pages; each page 25 memories
25 pages; each page 20 memories
50 pages; each page 10 memories
Step (MW)
9 kHz
10 kHz (North America)
Type of batteries
Normal D size batteries (1.5V each battery)
Rechargeable batteries (1.2V each battery)
FM frequency range
76-108 MHz (Japan)
87-108 MHz
87.5-108 MHz(North America)
22
Step (MW) FM frequency range
Type of batteries".