Trailer Sway Control (Tsc); Esc Activation/Malfunction Indicator Light And Esc Off Indicator Light - Jeep Grand Cherokee 2014 Owner's Manual

Srt8
Hide thumbs Also See for Grand Cherokee 2014:
Table of Contents

Advertisement

Trailer Sway Control (TSC)

TSC uses sensors in the vehicle to recognize an exces-
sively swaying trailer and will take the appropriate
actions to attempt to stop the sway. The system may
reduce engine power and apply the brake of the appro-
priate wheel(s) to counteract the sway of the trailer. TSC
will become active automatically once an excessively
swaying trailer is recognized. No driver action is re-
quired. Note that TSC cannot stop all trailers from
swaying. Always use caution when towing a trailer and
follow the trailer tongue weight recommendations. Refer
to "Trailer Towing" in "Starting and Operating" for
further information. When TSC is functioning, the "ESC
Activation/Malfunction Indicator Light" will flash, the
engine power may be reduced and you may feel the
brakes being applied to individual wheels to attempt to
stop the trailer from swaying. TSC is disabled when the
ESC system is in the "Partial Off" mode.
WARNING!
If TSC activates while driving, slow the vehicle
down, stop at the nearest safe location, and adjust the
trailer load to eliminate trailer sway.
ESC Activation/Malfunction Indicator Light And
ESC OFF Indicator Light
The "ESC Activation/Malfunction Indicator
Light" in the instrument cluster will come on
when the ignition switch is turned to the ON
position. It should go out with the engine
running. If the "ESC Activation/Malfunction Indicator
STARTING AND OPERATING 383
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

2014 grand cherokee srt8

Table of Contents