Jeep Grand Cherokee 2014 Owner's Manual page 219

5. Press the "FWD Collision Warning" Far or Near
soft-key for your desired preference. Then press the
back arrow.
6. Press the second "FWD Collision W..." soft-key.
7. Press the "Active Braking" On or Off soft-key.
The default status of FCW is the "Far" setting and the
Active Braking is the "On" setting, this allows the system
to warn you of a possible collision with the vehicle in
front of you when you are farther away and it applies
limited braking. This gives you the most reaction time to
avoid a possible collision.
Changing the FCW status to the "Near" setting, allows
the system to warn you of a possible collision with the
vehicle in front of you when you are much closer. This
setting provides less reaction time than the "Far" setting,
which allows for a more dynamic driving experience.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 217
NOTE:
• The system will retain the last setting selected by the
driver after ignition shut down.
• FCW may not react to irrelevant objects such as
overhead objects, ground reflections, objects not in the
path of the car, stationary objects that are far away,
oncoming traffic, or leading vehicles with the same or
higher rate of speed.
• FCW will be disabled like ACC, with the unavailable
screens.
FCW Limited Warning
If the system turns off, and the EVIC displays "ACC/
FCW Limited Functionality" or "ACC/FCW Limited
Functionality Clean Front Windshield" momentarily,
there may be a condition that limits FCW functionality.
Although the vehicle is still drivable under normal
conditions, the active braking may not be fully available.
3