Using Homelink; Security; Troubleshooting Tips - Jeep Grand Cherokee 2014 Owner's Manual

Hide thumbs Also See for Grand Cherokee 2014:

Table of Contents

250 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Using HomeLink®

To operate, press and release the programmed HomeLink®

button. Activation will now occur for the programmed

device (i.e., garage door opener, gate operator, security

system, entry door lock, home/office lighting, etc.,). The

hand-held transmitter of the device may also be used at any

It is advised to erase all channels before you sell or turn

in your vehicle.

To do this, press and hold the two outside buttons for 20

seconds until the red indicator flashes. Note that all

channels will be erased. Individual channels cannot be

The HomeLink® Universal Transceiver is disabled when

the Vehicle Security Alarm is active.

If you are having trouble programming HomeLink®,

here are some of the most common solutions:

• Replace the battery in the original hand-held transmitter.

• Press the LEARN button on the Garage Door Opener

to complete the training for a Rolling Code.

• Did you unplug the device for programming and

remember to plug it back in?

If you have any problems, or require assistance, please

call toll-free 1–800–355–3515 or, on the Internet at

www.HomeLink.com for information or assistance.

Chapters

Table of Contents

2014 grand cherokee srt8